矿物冶金与材料学报

1.A new process of extracting vanadium from stone coal Yan-hua Liu，Chao Yang，Pei-you Li，Shi-qi Li

2.Simulation of solute transportation within porous particles during the bioleaching process Sheng-hua Yin，Ai-xiang Wu，Shao-yong Wang，Hong-jiang Wang

3.Magnetohydrodynamic flow over a moving plate in a parallel stream with an induced magnetic field Khamisah Jafar，Roslinda Nazar，Anuar Ishak，Ioan Pop

4.Simulation of heat transfer in steel billets during continuous casting A.Ramírez-López，R. Aguilar-López，M. Palomar-Pardavé，M.A. Romero-Romo，D. Mu(n)oz-Negrón

5.Effect of phosphorus on the microstructure and mechanical properties of strip cast carbon steel Na Li，Zhen-yu Liu，Guo-ping Zhou，Xiang-hua Liu，Guo-dong Wang

6.Fabrication and sintering behavior of high-nitrogen nickel-free stainless steels by metal injection molding Zi-wei Xu，Cheng-chang Jia，Chun-jiang Kuang，Xuan-hui Qu

7.Microstructure and mechanical properties of FGBA/BG air cooling bainitic steels containing niobium Chun Feng，Hong-sheng Fang，Bing-zhe Bai，Yan-kang Zheng

8.Influence of isothermal aging on σ precipitation in super duplex stainless steel Xiao-feng Wang，Wei-qing Chen，Hong-guang Zheng

9.Oxidation behavior of the Fe-36Al-0.09C-0.09B-0.04Zr alloy at 1250℃ Jun-you Liu，Feng Li，Jie Liu，Yi Zhang，Jin-cheng Jiang，Dun-xu Zou

10.M(o)ssbauer and electron microscopy study of martensitic transformations in an Fe-Mn-Mo alloy T.Kirindi，U.Sari，M.Kurt

11.Electrical conductivity changes of bulk tin and Sn-3.0Ag-0.5Cu in bulk and in joints during isothermal aging Bin Liu，Fu Guo

12.Solid state interfacial reactions in electrodeposited Ni/Sn couples Wen-ming Tang，An-qiang He，Qi Liu，Douglas-G.Ivey

13.Effect of cooling rate on the phase transformation and stability of the mushy zone during the solidification of Waspaloy Ling Wang，Yi-jun Yao，Bin Liu，Bo-ying Zhong，Jian-xin Dong

14.Hydrothermal synthesis and photoluminescence behavior of CeO2 nanowires with the aid of surfactant PVP Ming-zai Wu，Yan-mei Liu，Peng Dai，Zhao-qi Sun，Xian-song Liu

15.Structure, optical, and magnetic properties of Mn-doped ZnO films prepared by sputtering Li-wei Wang，Zheng Xu，Fu-jun Zhang，Su-ling Zhao，Li-fang Lu

16.Microstructural evolution of titanium matrix composite coatings reinforced by in situ synthesized TiB and TiC by laser cladding Jun Li，Zhi-shui Yu，Hui-ping Wang，Man-ping Li

17.Additive-aided electrochemical deposition of bismuth telluride in a basic electrolyte Wu-jun Qiu，Sheng-nan Zhang，Tie-jun Zhu，Xin-bing Zhao

18.Phase field simulation of the 180° domain-switching process in PbTiO3 single crystal under an antiparallel electric field Ping-Li Liu，Wu-Yang Chu，Li-Jie Qiao

19.Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction Zhuan Li，Peng Xiao，Xiang Xiong

20.Erratum to: Simulation factors of steel continuous casting A.Ramírez-López，R. Aguilar-López，J.González-Trejo，M. Palomar-Pardavé

1.Mineralogical and sink-float studies of Jajarm low-grade bauxite Mohammad Zarbayani，Esmaeil Jorjani，Mirsaleh Mirmohammadi，Mohammad Taghi Shadloo，Mohammad Noaparast

2.A new route of ferric ions rejection in a synthetic nickel leach solution Hai-peng Wang，Jing Zhao，Wen Liang，Yuan Mei，Babak Houdeh，Yuan Tian

3.Fluid flow in large-capacity horizontal continuous casting tundishes Shu-feng Yang，Jing-she Li，Jing Jiang，Xiao-chuan Lin，Lin Lin

4.Simulation factors of steel continuous casting A. Ramírez-López，R. Aguilar-López，A. Kunold-Bello，J. González-Trejo，M. Palomar-Pardavé

5.Roles of titanium-rich precipitates as inoculants during solidification in low carbon steel Ming-lin Wang，Guo-guang Cheng，Sheng-tao Qiu，Pei Zhao，Yong Gan

6.Effects of chromium on the corrosion and electrochemical behaviors of ultra high strength steels Jin-yan Zhong，Min Sun，Da-bo Liu，Xiao-gang Li，Tian-qi Liu

7.Microscopic characterization of semi-solid aluminium alloys Ya-lin Lu，Miao-quan Li，Xing-cheng Li，Xiao-ping Li

8.Microstructure evolution and phase transformation of traditional cast and spray-formed hypereutectic aluminium-silicon alloys induced by heat treatment Long-gang Hou，Yuan-hua Cai，Hua Cui，Ji-shan Zhang

9.Limitation of the Johnson-Mehl-Avrami equation for the kinetic analysis of crystallization in a Ti-based amorphous alloy Jun Wang，Hong-chao Kou，Hui Chang，Xiao-feng Gu，Jin-shan Li，Hong Zhong，Lian Zhou

10.Mechanism of α-Cr precipitation and crystallographic relationships between α-Cr and δ phases in Inconel 718 alloy after long-time thermal exposure Zhong-nan Bi，Jian-xin Dong，Mai-cang Zhang，Lei Zheng，Xi-shan Xie

positional dependence of thermal and elastic properties of Cu-Ti-Zr-Ni bulk metallic glasses Jihye An，Hyunjune Yim，Choi-Yim Haein

12.Formation and corrosion properties of Fe-based bulk metallic glasses Chun-lei Zhu，Qing Wang，JIE Zhang，Ying-min Wang，Chuang Dong

13.Room temperature plastic deformation behavior of ZrCuNiAl bulk metallic glasses Ping-jun Tao，Yuan-zheng Yang，Xiao-jun Bai，Zhi-wei Xie，Xian-chao Chen

14.Effects of yttrium on the formation and magnetic properties of bulk metallic glassy (Fe, Co)-B-Si-Nb alloys Dun-gu Wen，Yuan-zheng Yang，Zhen-jiang Dong，Ping-jun Tao，Zhi-wei Xie，Xian-chao Chen

15.Effect of Dy substitution on the microstructure and magnetic properties of nanograin Nd-Fe-B single-phase alloys Zhi-an Chen，Ji Luo，Zhi-meng Guo

16.Microstructure, crystalline phase and electrical properties of Li0.06(Na0.5K0.5)0.94Nb(1-2x/5)MgxO3 lead-free piezoelectric ceramics Hai-tao Li，Bo-ping Zhang，Qian Zhang，Peng-peng Shang，Gao-lei Zhao

17.Synthesis and luminescence properties of Eu3+, Sm3+ doped (YxGd1-x)2O3:Si4+, Mg2+ long-lasting phosphor Yan Liu，Shi-xiang Liu，Ming-wen Wang，Wen-jun Li，Ting Zhang，Xia Zhang

18.Tool life modeling for evaluating the effects of cutting speed and reinforce-ments on the machining of particle reinforced metal matrix composites Metin K(o)k

19.Utilization of waste vehicle tires in concrete and its effect on the corrosion behavior of reinforcing steels O(g)uzhan Kele(s)temur

20.Simple method to rapidly fabricate chain-like carbon nanotube films and its field emission properties Zhi-yuan Wu，Shuang-qi Hu，Zhi-qian Wang

21.Synthesization and crystallization mechanism of nano-scale γ-AlOOH with various morphologies Bao-hong Hao，Ke-ming Fang，Lan Xiang，Qiang Liu

1.Molybdenite alkali fusion and leaching: reactions and mechanism Reza Ebrahimi-Kahrizsangi，Mohammad Hasan Abbasi，Ali Saidi

2.Cyanidation of gold clay ore containing arsenic and manganese Yu-liang Li，Jian Liu，Wei-sheng Guan

3.Acting mechanism of F, K, and Na in the solid phase sintering reaction of the Baiyunebo iron ore Zhi-zhong Hao，Sheng-li Wu，Yi-ci Wang，Guo-ping Luo，Hu-lin Wu，Xiang-guang Duan

4.Water modeling of molten steel flow in a multi-strand tundish with gas blowing Jing Jiang，Jing-she Li，Hua-jie Wu，Shu-feng Yang，Tao Li，Hai-yan Tang

5.Similarity solutions for the mixed convection flow over a vertical plate with thermal radiation Anuar Ishak，Nor Azizah Yacob，Roslinda Nazar，loan Pop

6.Clogging behavior of submerged entry nozzles for Ti-bearing IF steel Heng Cui，Yan-ping Bao，Min Wang，Wei-shuang Wu

7.Longitudinal surface cracks of thin slabs Yan-hui Sun，You-jin Ni，Hai-tao Wang，Zhong-bo Xu，Kai-ke Cai

8.Hot deformation behavior of Super304H austenitic heat resistant steel Shu-ping Tan，Zhen-hua Wang，Shi-chang Cheng，Zheng-dong Liu，Jie-cai Han，Wan-tang Fu

9.Numerical simulation on the microstress and microstrain of low Si-Mn-Nb dual-phase steel Hai-feng Dong，Jing Li，Yue Zhang，Joongkeun Park，Qing-xiang Yang

10.Properties and homogeneity of 550-MPa grade TMCP steel for ship hull Yi Nie，Cheng-jia Shang，Xin Song，Yang You，Chuang Li，Xin-lai He

11.Microstructures and mechanical properties of a new titanium alloy for surgical implant application Jun Li，Lian Zhou，Zuo-chen Li

12.Influences of 2.5wt% Mn addition on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys U(g)ur Sari

13.Ductile Fe-based amorphous alloys with high iron content Feng-juan Liu，Tao Zhang，Shu-jie Pang，Ke-fu Yao

14.Preparation and thermal stability of Pd_(40.5)Ni_(40.5)SixP_(19-x) bulk metallic glasses Yang Li，Yao-cen Wang，Ke-fu Yao

15.Synthesis, structure and mechanical properties of Zr-Cu-based bulk metallic glass composites Qing-sheng Zhang，Wei Zhang，Guo-qiang Xie，Akihisa Inoue

16.Strain rate response of a Zr-based composite fabricated by Bridgman solidification Jun-wei Qiao，Yong Zhang，Ji-heng Li，Guo-liang Chen

17.Synthesis and characterization of spinel Li_(1.05)Cr_(0.1)Mn_(1.9)O_(4-z)F_z as cathode materials for lithium-ion batteries Yan-bin Chen，Yang Hu，Fang Lian，Qing-guo Liu

18.Preparation and upconversion luminescence of YVO_4:Er~(3+), Yb~(3+) Yong-ming Zhang，Yan-hong Li，Peng Li，Guang-yan Hong，Ying-ning Yu

19.Dependence of domain wall structures on repetition n in [Pt(0.5 nm)/Co(0.4nm)]n/NiO(1.1 nm)/[Co(0.4 nm)/Pt(0.5 nm)]_n multilayers Xiao-xia Li，Gang Han

20.Effect of sintering temperature on the microstructure and thermal conductivity of Al/diamond composites prepared by spark plasma sintering Ke Chu，Cheng-chang Jia，Xue-bing Liang，Hui Chen

21.Effect of hydrogen on the friction and wear of Ni-P coatings Qing-jun Zhou，Jin-xu Li，Wu-yang Chu

22.Deposition of crackless freestanding diamond films on Mo substrates with Zr interlayer Zheng Liu，Cheng-ming Li，Liang-xian Chen，Li-mei Wang，Li-fu Hei，Fan-xiu Lü

1.Processing technologies for gold-telluride ores Jian Zhang，Yao Zhang，William Richmond，Hai-peng Wang

2.Ore-proportioning optimization technique with high proportion of Yandi ore in sintering Sheng-li Wu，Hong-liang Han，Hai-xia Li，Jian Xu，Shi-dong Yang，Xiao-qin Liu

3.Periodic flow characteristics during RH vacuum circulation refining Xin-gang Ai，Yan-ping Bao，Wei Jiang，Jian-hua Liu，Peng-huan Li，Tai-quan Li

4.Decarburization rate of RH refining for ultra low carbon steel Bai-song Liu，Guo-sen Zhu，Huan-xi Li，Ben-hai Li，Yang cui，Ai-min Cui

5.Determination of inclusions in liquid steel after calcium treatment Kabamba Tshilombo

6.Thermodynamic analysis on the formation mechanism of MgO·Al_2O_3 spinel type inclusions in casing steel Hai-yan Tang，Jing-she Li

7.Experimental determination of mechanical properties and short-time creep of AISI 304 stainless steel at elevated temperatures Josip Brnic，Ji-tai Niu，Goran Turkalj，Marko Canadija，Domagoj Lanc

8.Deformation behavior and microstructure of an Al-Zn-Mg-Cu-Zr alloy during hot deformation Liang-ming Yan，Jian Shen，Jun-peng Li，Zhou-bing Li，Xiao-dong Yan

9.Thixo-forging and simulation of complex parts of aluminum alloy AlSi7Mg Kai-kun Wang

10.Hydrogen-induced cracking behaviors of Incoloy alloy 825 Yong-jin Yang，Ke-wei Gao，Chang-feng Chen

11.Macrostructure and properties of thin walled copper tubes prepared by the downward continuous unidirectional solidification method Xi Shen，Hong Zhang，Zi-dong Wang，Hua-fen Lou，Yi-ming Jia，Ping-xia Hu

12.Mechanical properties of electroformed copper layers with gradient microstructure Qiang Liao，Li-qun Zhu，Hui-cong Liu，Wei-ping Li

13.3D Modeling of the preparation process of metal rubber material Ming-ji Huang，Xiu-ping Dong，Guo-quan Liu

14.Rapid growth of ZnO hexagonal tubes by direct microwave heating Zhen-qi Zhu，Jian Zhou

15.Effect of SiO_2 addition on the microstructure and electrical properties of ZnO-based varistors Zhen-hong Wu，Jian-hui Fang，Dong Xu，Qin-dong Zhong，Li-yi Shi

16.Preparation and performance of dye-sensitized solar cells based on ZnO-modified TiO_2 electrodes Sheng-jun Li，Yuan Lin，Wei-wei Tan，Jing-bo Zhang，Xiao-wen Zhou，Jin-mao Chen，Zeng Chen

17.Influence of substrate metals on the crystal growth of AIN films Juan Xiong，Hao-shuang Gu，Kuan Hu，Ming-zhe Hu

18.Electrodeposition and characterization of thermoelectric Bi_2Se_3 thin films Xiao-long Li，Ke-feng Cai，Hui Li，Ling Wang，Chi-wei Zhou

19.Relationship between the microstructure and reaction performance of aluminosilicate Xiao-ming Liu，Heng-hu Sun，Xiang-peng Feng，Na Zhang

20.Relationship between polymerization degree and cementitious activity of iron ore tailings Zhong-lai Yi，Heng-hu Sun，Chao Li，Yin-ming Sun，Yu Li

21.Cemented backfilling performance of yellow phosphorus slag Jia-sheng Chen，Bin Zhao，Xin-min Wang，Qin-li Zhang，Li Wang